Operation (continued) – Memorex iWake Mi4004 User Manual
Page 14
13
OPERATION (CONTINUED)
NOTES:
•
It is not necessary to set the volume level for the alarm. When the alarm
time is reached, the alarm volume level will be set to the minimum (Level
1) and it will increase one step every five seconds continuously until
Volume Level 12 is reached.
•
When the actual time matches the selected preset alarm time(s), if set to
Radio or Buzzer, the unit will automatically turn on for 20 minutes and
then shut off. If set to iPod
®
, the unit will start playback on the track that
you selected and the tracks following it in the playlist. The unit will
playback for 20 minutes then turn off automatically or, if the remaining
playlist has less than 20 minutes of playback time remaining, the unit will
just playback the remaining time of the playlist and then stop.
•
TO SHUT OFF THE ALARM, see TO SHUT THE ALARM OFF section on
the next page.
•
While the alarm is sounding, if the other alarm reaches the alarm time, the
first alarm will stop sounding and the second alarm will start sounding.
•
Make sure you have disconnected the headphones from the Headphones
jack (rear of the unit) and disconnected the audio cable from the LINE IN
jack (rear of the unit); otherwise, there will be no sound when the actual
time matches the preset alarm time.
If set to iPod
®
, insert the iPod
®
as shown on
page 8. Then, using the controls on the iPod
®
,
select the track that you would like to wake to
and put the iPod
®
into Pause mode. DO NOT
turn the iPod
®
off; let it go to sleep by itself.
When the alarm time is reached, the unit will
start playback on the track that you selected
and the tracks following it in the playlist. The
Mi4004 will playback for 20 minutes then turn
off automatically or, if the remaining playlist
has less than 20 minutes of playback time
remaining, the Mi4004 will just playback the
remaining time of the playlist and then stop.
5