Monte Carlo Fan Company 5HS42 Series - Manual (Page 4)

Place blade holders onto blades aligning holes
in blade holder with holes in blade. Make sure
that the side of the blade you select is facing
downward. Install 3 screws and fiber wash-
ers to back side of blade as shown. Tighten
screws securely. Repeat this process 4 more
times until all blades are assembled.
Install blades to motor using the 10
motor screws provided. Tighten screws
securely.
21
22
Remove the screws from the side panel
corresponding to the closed holes on the
canopy upper rim. Keep these screws for
later use. Remove the all thread studs
from the lower part of the mounting
bracket.
Lift fan to mounting bracket, aligning the “L”
shape holes with the scresws on the mount-
ing bracket. Turn the fan clockwise to lock
in position. Re-install the screws removed in
the previous step and tighten securely.
19 20