Miller Electric XLix - Manual (Page 4)

Page 2
SECTION 2 − SPECIFICATIONS
Viewing Field (XLi, Xlix) 97mm x 47mm/3.81” x 1.85”
Viewing Field (Elite) 97mm x 60mm/3.81” x 2.62”
Reaction Time (XLi) 0.0000555sec (1/18,000)
Reaction Time (Xlix, Elite) 0.0000500sec (1/20,000)
Available Shades Darkened State: No. 9 − No. 13 / Light State: No. 4
provides continuous UV and IR protection
Sensitivity/Grind Mode Control Adjusts for varying ambient light and welding arc
Delay Control Slows lens dark-to-light state between 0.1 and
1.0 seconds
Automatic Power Off Shuts lens Off 15−20 minutes after last arc is struck
Low Battery Indicator Red LED light illuminates to indicate 2−3 days
remaining battery life
Power Supply CR2450 Lithium Batteries (Miller Part No. 217 043)
Sensors Independent/Redundant (Two−XLi, Xlix) (Four−Elite)
Operating Temperature 14_F to 131_F / −10_C to +55_C
.
When stored in extremely cold temperatures, warm
helmet to ambient temperature before welding.
Storage Temperature −4_F to 158_F / −20_C to +70_C
.
When stored in extremely cold temperatures, warm
helmet to ambient temperature before welding.
Total Weight XLi & Xlix: 453.6g (16oz.) / Elite: 510.3g (1lb 2oz.)
Standards ANSI Z87.1 and DIN/CE/TUV (CSA: Xlix, Elite)
Warranty 2 years from date of purchase (see Section 9)
.
The helmets in this manual are covered by one or more of the following patents:
U.S. Patent − No. 6,552,316, No. 6,483,090, No. 6,614,409
U.S. Patent Application − No. 29/223,100, No. 11/053,977
DE. Patent − No. 199 59 944 C2, No. 199 59 945 C2
FR. Patent − No. 9916004