Miele DA 230-3 - Manual (Page 16)

Changing the light bulb
Before changing the light bulbs, dis-
connect the hood from the power
supply by either removing the fuse,
unplugging it, or manually "tripping"
the circuit breaker.
When in use halogen bulbs become
extremely hot, and they can burn
your hands. Do not attempt to
change the bulbs until they have
had sufficient time to cool down.
Do not touch the bulb surface. Fin-
gerprints or body oils deposited on
the bulb will decrease the life of the
bulb. Please follow the bulb manu-
facturer’s instructions.
To change a bulb:
^ Remove the outer ring, a.
^ Support the glass, c, while detach-
ing the circlip,
b. Be careful not to let
the glass fall out.
^ Pull the old bulb, d, out of its socket
and replace it with a new one.
^ Reinstall the glass, circlip and outer
ring.
Never use the lights without the
glass,
c, installed. The glass is spe-
cially made to filter harmful light
rays.
Cleaning and care
16