Installation accessories – Miele DA 249-4 User Manual

Page 29

2 protective shields

prevent scratches to the chimney
during installation.

2 hose clips

for securing the

ducting.

1 reducing collar

for use with 5" (125 mm) exhaust
ducting.

Upper retaining plate

secures the

chimney extension.

Middle retaining plate

for

additional stability of the chimney.

Lower retaining plate

secures the

canopy and motor assembly.

Installation kit

for recirculation

mode contains diverter, 2 grilles and an
hose (optional accessory)

Caution: During the installation
process, please be careful of sharp
edges that can cause harm.

Installation instruction sheet

8 large headed screws 5 x 40 mm

for securing the retaining plates and the
canopy.

(S8 wall anchors included in the
packaging are not for use in USA / CDN.)

2 M 6 locking nuts

for securing the

motor assembly.

2 screws 3.9 x 7.5 mm

for securing the

chimney.

2 screws M4

with locking nuts and

plastic washers for securing the glass
canopy.

1 allen wrench

for adjusting the unit height and fixing
the operating unit.

1 screw cover

1 lever

for disassembling the chimney

Installation accessories