Meyer 8720 - Manual (Page 61)

Model 8720/8865 -61-
Industrial 8720
Trailer Type
w/ 21.5 Tires “
Industrial 8720
Truck Mount
w/ Mount Brkts.
Industrial 8856
Trailer Type w/
28L x 26 Tires
Industrial 8865
Truck Mount w/
Mount Brkts.
CAPACITY
Bushels Heaped 720 720 865 865
Gallons/Cu.ft. (Struck) 3500/468 3500/468 4200/562 4200/562
Cu. Yards. (struck) 17.33 cu. yards 17.33 cu. yards 20.8 cu. yards 20.8 cu. yards
DIMENSIONS
Overall Length
26’6” 20’10” w/ Hyd
Motor
29’10” 24’2” w/ Hyd
Motor
Inside Tank Length 16’8” 16’8” 20’ 20’
Loading Height 87” w/21.5 or
425/65
91” w/16.00X20
68”Plus Truck
Height
88” w/28L x 26 68” Plus Truck
Height
Overall Height -
Top of Splash Guard
96” w/21.5 or
425/65
100” w/16.00X20
77”Plus Truck
Height
97” w/28L x 26
Tires
77” Plus Truck
Height
Overall Width (std. Axle)
Outside Tires
118” w/21.5L
114” w/16.00X20
101” N/A 101”
Overall Width w/high
Floatation axle pkg.
141” w/28L x 26 141” w/ 28L x 26
Tires
Top Inside Tank Width 101” 101” 101” 101”
SPECIFICATIONS
Total Weight
13,720# 9,400# 18,020# 10,700#
Maximum Load Net (Lbs.) 35,200# 35,200# 38,000# 38,000#
Lower Auger Diameter 23” 23” 23” 23”
Lower Auger Flighting Thick-
ness
3/8” Sectional 3/8” Sectional 3/8” Sectional 3/8” Sectional
Independent Lower Auger
Shear Hub Sprockets
Standard Standard Standard Standard
3rd Auger (solid material) Standard - 16” Standard -16” Standard - 16” Standard - 16”
Drive - PTO-RPM 1000 RPM Con-
stant Velocity 1
3/8-21 spline
PTO - Direct Std.
Hydrostatic-Opt.
1000 RPM Con-
stant Velocity 1
3/4-20 Spline
PTO - Direct Std.
Hydrostatic-Opt.
Drive Line Protection Overrunning Cut
Out Clutch w/
Shear Bolt Au-
gers
Cut Out Clutch w/
Shear Bolt (Pto
Version)
Overrunning Cut
Out Clutch w/
Shear Bolt Au-
gers
Cut Out Clutch w/
Shear Bolt (Pto
Version)
Roller Chain Drive 80-120-140 80-120-140 80-120-140 80-120-140
Roller Chain Auto Oiler Standard Standard Standard Standard
Expeller Speed (RPM) 716 RPM 716 RPM 716 RPM 716 RPM
Expeller Diameter 30” 30” 30” 30”
TANK CONSTRUCTION
Material
Copper Bearing
Steel
Copper Bearing
Steel
Copper Bearing
Steel
Copper Bearing
Steel
Thickness - Auger Troughs 1/4” 1/4” 1/4” 1/4”
Thickness - Tank Sides 3/16” 3/16” 3/16” 3/16”
MEYER INDUSTRIAL SPREADER
DIMENSIONS & SPECIFICATIONS
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.