Memorex MVD2037 - Manual (Page 10)

9
CONNECTION
CONNECTING THE DVD TO A TV USING THE AUDIO/VIDEO OUTPUT JACKS
Audio Cable (Included)
Video Cable (Included)
From
Video Out
From
Audio
Out
To
Audio In
To
Video In
CONNECTING THE DVD TO A TV USING THE S-VIDEO OUTPUT JACK
Audio Cable (Included)
S-Video Cable (Not Included)
From
S-Video
Out
From
Audio
Out
To
Audio In
To S-Video In
NOTES FOR CONNECTING TO A TV:
• If your TV has an S-Video input, connect the DVD player with the S-Video cable for best results.
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any connections.
• If your TV only has one audio input, the use of a “Y” connector may be necessary. Visit your local electronics supply store.
• Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
• Set the VIDEO OUT Option (on the GENERAL MENU Page) to S-VIDEO if using S-Video.
• After connecting, press the AUDIO MODE button to the desired audio setting. (Please refer to ‘AUDIO MODE’ on page
20.)