Marshall electronic OPTIONAL ACCESSORIES MC-0105 - Manual

Marshall Electronics
Product Overview
Features
Mechanical Specifications
Optional Accessories
Converts Composite Video or Y/C (Svideo ) to VGA (RGBHV) for display on projectors or data screens
NTSC or PAL operation with automatic detection
Illuminated power and input signal indicators
Transforms interlaced 525/625 images to Progressive Scan
Adaptive filtering removes NTSC interlace artifacts
2x over sampling for true color reproduction
VGA output processed as 4:4:4/RGB
Automatically scales NTSC 4:3 input to 640x480 Pixel resolution
Automatically scales NTSC 16:9 input to 720x480 Pixel resolution
Automatically scales Pal 4:3 input to 640x576 Pixel resolution
Automatically scales Pal 16:9 input to 720x576 Pixel resolution
Automatic Gamma correction
Automatic color space conversion
Switch between VGA and composite or Y/C inputs
The MC-0105 is used to convert Composite Video or Y/C (S-Video) (NTSC/PAL) to VGA. When placed in line with a
monitor cable there is an added capability to switch the display between video and VGA signals.
7 2
Cable: RGB-5HD15-X
(X = Length in feet 6, 10, 15, 20) V-CB1 Desktop Stand
V-CRM-2
2U (1.75” tall) Conversion and Distribution 3 Module Bracket.Up
to three Marshall Electronics 4.75” wide conversion or distribution
modules can be securely installed into a standard EIA 19 inch
rack with the V-CRM-3 mounting bracket. Every V-CRM-3 includes
two blank panels for a clean cosmetic appearance.
V-CRM-3
Single RU (1.75” tall) Conversion and Distribution 2 Module
Bracket.Two Marshall Electronics 7.72” wide or one 7.72” plus one
4.75” wide conversion or distribution modules can be securely
installed into a standard EIA 19 inch rack with the V-CRM-2
mounting bracket. Every V-CRM-3 includes one blank panel and
one 4.75” adapter for a clean cosmetic appearance.
MC-0105 Distribution Amplifier Users Guide
7 4
7
5
Signal Input HD-15 VGA, Composite Video BNC 75 Ω , Y/C Video 4 pin Mini- din
Signal Output HD-15 VGA (27 Mhz for NTSC)
Sample Frequency 27mhz
K factor <1%
Signal to Noise >42 db
Dynamic gain/phase <1% / <1.50
Cable length Up to 350ft (100m) AGC compensated
Power required 6V D.C. supplied from external supply (Model V-PS6-1.2A)
Dimensions 4.75”W x 3.75”D x 1.0”H
Weight 0.55 lbs (0.25kg)
V-PS6-1.2A Power Supply Weight 0.20 lbs (0.10kg)
7 3 Electrical Specifications
1910 East Maple Ave. El Segundo, CA 90245 • Tel.: 800-800-6608 • Fax:310-333-0688 • www.LCDRacks.com • Email: [email protected]
7
1