Handicare MB3150-GB - Manual (Page 8)

8
A
MB3150-GB
Figure 11
Figure 12
Figure 10
Using the wheelchair
Full footplate (Standard on XL
chairs)
Figure 10
The full footplate can be split in two and
tipped up for transfers. Ensure that the
footplates lock in place when you put them
back down.
The footplates lock most easily into place
if they are angled right in to each other
when you put them back down (see figure
10).
Swing out/Attach/Remove the
leg supports (Full footplate)
Figures 11 and 12
The leg supports can be swung in/out and
removed for easier movement.
The supports can be released by twisting
the handle (11A) inwards or outwards
when the leg support is swung.
For an easier grip on
the release handle, the
starting position of the
handle can be changed.
Hold on tight to the
lower part of the release
handle whilst lifting the handle itself. Turn
the handle to the desired position and
release.
After the leg support has been swung to
the side, it can be lifted straight up and
completely removed if desired. In order
to attach it again, carry out these steps
in reverse order, and the handle will
automatically lock.