MITSUBISHI ELECTRIC DATA PROJECTOR - Manual (Page 9)

E-8
Checking the Supplied Accessories
Remove the main unit and the accessories from the box and check that the following items are included.
Audio conversion cable (Mini-jack/ RCA pin plug, 15 cm /
0.5 feet) [1]
This cable is used with equipment whose audio connector is
of the phono pin type. Connections are described on Page E-
20.
No. 777918500
Audio cable (Mini plug, 2 m / 6.6 feet) [1]
This cable is used with equipment that has phono type audio
jacks. Connections are described on Page E-20.
No. 777918400
Video cable (RCA pin plug, 2 m / 6.6 feet) [1]
This cable is used in the connection of video equipment that
has a video connector. Connections are described on Page E-
18.
No. 777918200 RGB signal cable
(Mini D-sub 15-pin, 2 m / 6.6 feet) [1]
This is used in making connections with a personal computer.
See Page E-16 about connections.
No. 777918100
S-Video cable (Mini DIN 4-pin plug, 2 m / 6.6 feet) [1]
This cable is used in the connection of video equipment that
has an S-video connector. Connections are described on Page
E-18.
No. 777918300 Wireless remote control unit with laser pointer [1] /
Size AAA batteries [2]
This controls the projector. (See Page E-12.)
No. 777998012
FR EEZE
MUTE
LASER
AUTO
TIMER VOL
ZOOM
RGB
VIDEO
R-CLICK/ CANCEL
QUICK
MENU
ENTER
ST ANDBY
Q
1
2 3
4
USB cable (type A, 2 m / 6.6 feet) [1]
Used to perform mouse operations on a computer using the
projector’s remote control unit. Connections are described on
Page E-32.
No. 777918600
Power cable (1.8 m / 5.9 feet) [1]
This power cable supplies power to the unit. See Page E-21
about connections.
No. 777918002 (UL)