Magnadyne M9900 - Manual (Page 7)

7
1. Avoid using C-120 length tape in this mechanism.
2. All time lengths up to C-90 are acceptable.
3. Check tape case before inserting the tape into the
cassette slot (7).
4. Take up any slack on the tape by using a pencil in
the hub to tighten the tape.
Cassette Player Precautions
The tone and speaker controls are retractable.
Pressing in on the control will lock it into a recessed
position. Pressing the controls when they are in the
recessed position will release them to be used to
make adjustments.
Bass Control (12):
The bass control adjusts the amount of low
frequency you hear in the music. Rotate the con-
trol to achieve the desired tone quality.
Balance Control (12):
Pull on the control knob (12) to activate the bal-
ance feature of the control. The balance control
adjusts the sound output to the left and right
speakers. Rotate the control to achieve the
desired output balance between the left and right
speakers.
Treble Control (12):
The treble control adjusts the amount of high fre-
quency you hear in the music. Rotate the control
to achieve the desired tone quality.
Fader Control (12):
Pull on the control knob to activate the fader fea-
ture of the control. The fader control adjusts the
sound output level between the front and rear
speakers. Rotate the control to achieve the
desired output balance between the front and rear
speakers.
Tone and Speaker Controls
Loose Tape
Cassette Player Maintenance
Periodic cleaning of the tape head and drive mechanism is required to maintain reliable performance. A
quality head and mechanism cleaning system can be purchased at any music store or electronics store and
should be used regularly to maintain the performance and life of the tape mechanism and heads. (Follow
manufactures recommendations for use and frequency of use)
9900 Manual 10/3/02 10:43 AM Page 7