Monitor Audio PLW-15 - Manual (Page 14)

monitoraudio.co.uk 12
Specification
Amplifier Output: 1000 Watts (RMS) 2000 Watts (Peak)
Frequency Response: 16Hz - 40/160Hz Variable
Crossover (Low Pass): 40Hz - 160Hz
Variable slope characteristic from 12 – 36dB/Octave
Sub-Sonic Filter (High Pass): 16 - 31Hz
EQ: 4 x Preset
1 x User Set
Equalisation: Graphic 9 Band Equaliser.
± 6dB in 0.5dB steps
Digital Volume Level: -80 – 0dB (2dB increments from -80 to -31dB; 1dB increments from -30 to 0dB)
Auto Sensing Line Level >5mV (RMS)
Input Requirements: Variable auto off 5 – 30 minutes in 5 minute intervals, user adjustable.
Variable Phase Control: 0, 45, 90, 135, 180, 225, 270, 315°
Internal Memory: 3 Independent Memory locations
Cabinet Specification: Sealed Cabinet with 30mm M.D.F construction with critical internal bracing.
Sealed amplifier compartment.
Amplifier Classification: Class- D amplifier, with DSP control
Driver Compliment: 1 x 15” C-CAM ® sub-woofer driver featuring triple suspension and 4” long throw voice
coil
Dimensions (H x W x D): 455 x 485 x 475mm
17 15/16 x 19 1/8 x 18 11/16”
All dimensions excluding grille and feet
Weight (unpacked) 50Kg (110lbs)
Mains Input Voltage:- 110 -120Vac, 220 - 240 Vac
(Factory Preset)
Fuse Type For countries with 220 – 240Vac supply use: 4A/250V 20MM UL/VDE
For countries with 110 – 120Vac supply use: 8A/250V 20MM UL/VDE
Trigger Input 3.5mm Jack input, +12Vdc = On State
Code System for All in One
Remote Controls
NEC SH6122
C-CAM ® is a registered trade mark of Monitor Audio Ltd
PLW15 manual.indd 12 30/04/2008 10:59:58