beautypg.com

Instrument cluster and indicators, Caution – Mazda 2008 RX-8 User Manual

Page 163

background image

Black plate (163,1)

If the needle on the gauge doesn't move
after starting the engine, follow steps 1
through 3.

If the engine oil pressure gauge moves to
L (low) while you are driving, drive to the
side of the road and park off the right-of-
way. Set the parking brake. Then follow
steps 1 through 3.

1. Turn off the engine and inspect the

engine oil level (page 8-12). If it's low,
add oil.

2. Start the engine.

3. If the needle still doesn't move, have

your vehicle checked at an Authorized
Mazda Dealer.

CAUTION

Don't run the engine if the oil
pressure is low. It could result in
extensive engine damage.

NOTE

The Mazda RX-8 requires regular checking of
the engine oil level. The compact, high
performance RENESIS rotary engine in your
vehicle consumes a small amount of engine oil
due to its structural design. An oil pump
optimizes the amount of oil injected to
lubricate the rotor seals in the combustion
cycle. Although your vehicle is equipped with
an engine oil level warning light and an
engine oil pressure gauge, it is best to keep the
engine oil level in the range between full and
low by checking the oil dipstick regularly.
Mazda recommends checking the oil level at
every second fuel filling. The oil consumption
of the engine depends on engine speed and
engine load. Under extreme driving conditions,
oil consumption can be higher.

qDashboard Illumination

Rotate the thumb wheel to adjust the
brightness of the instrument cluster and
other illuminations in the dashboard.

NOTE

l

The brightness of dashboard illuminations
(except instrument cluster) can be adjusted
when the headlight switch is in the

or

position.

l

The brightness of the instrument cluster
illumination can be adjusted when the
headlight switch is in any position.

Bright

Dim

Canceling the illumination dimmer

When the headlight switch is in the

or

position, the illumination of the

instrument cluster and the information
display dims (the instrument cluster
illumination color turns to red).

When driving on snowy or foggy roads,
or in other situations when the instrument
cluster or information display's visibility
is reduced due to glare from surrounding
brightness, cancel the illumination
dimmer and increase the illumination
intensity.

Driving Your Mazda

Instrument Cluster and Indicators

5-37

RX-8_8X44-EA-07G_Edition1 Page163
Friday, May 11 2007 5:3 PM

Form No.8X44-EA-07G