Metra Electronics 98-8999 - Manual (Page 2)

1
98-8999
POCKET ASSEMBLY
B2
A
B
Disconnect the negative battery
terminal to prevent an accidental
short circuit. 1
Snap Pocket Trimplate MIT onto
the front of the Pocket. Locate one
of the Left Brackets and mount it
to the “L” side of the Pocket with
(2) #6 x 1/4" Phillips Flat Head
Screws. Next locate one of the
Right Brackets and mount it to
the “R” side of the Pocket with (2)
#6 x 1/4" Phillips Flat Head
Screws. (Figure A) 2
Mount the factory brackets to the
shaded bosses (Fig. B2) with (4) #8
x 1/4" Phillips Pan Head Screws
supplied and mount the entire
assembly to the sub-dash. (Figure B) 3
MITSUBISHI POCKET