Memorex MD6883 - Manual (Page 15)

14
CD OPERATION (CONTINUED)
With a CD inserted, press the
PLAY/PAUSE (
®p)/POWER ON button
1 to turn the unit on and press the
STOP (■)/POWER OFF button
2 to
stop auto playback. Press the PROG
button
3; the PROG indicator will
appear in the CD display.
1
2 3
1
Select the first track to be played back
using the Skip/Search/Tuning
o 1 or n
2 button, then press the PROG button
3 again. Repeat this step to program
additional tracks up to a maximum of
24 tracks.
1
1
2
1
2
3
2
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Press the PLAY/PAUSE ( ®p)/POWER
ON button 1 to begin Programmed
playback and adjust the VOLUME
control
2 and DBBS switch 3 as
desired.
1
2
3
3
3
To skip forward or backward through the
programs, press the Skip/Search/ Tuning
o 1 or n 2 button. When the disc is
through playing, it will stop. Press the PROG
button
3 followed by the PLAY/PAUSE
( ®p)/POWER ON button 4 to play back
the programmed tracks again.
3
4
1
2
4
NOTES:
•
Press the STOP (■)/POWER OFF button to stop the disc before it is finished.
• As each program is played, the track number is shown in the display.
• To clear the memorized program: while in the Stop mode, press the PROG button
followed by the STOP (■)/POWER OFF button.
• Programming is the ability to preselect the order in which a series of tracks will be
played.
• Each track may be stored in the program memory as many times as desired (up to
24 tracks).