Multiquip A.C. GENERATOR GLW-180H - Manual (Page 21)

GLW-180H A.C. GENERATOR/WELDER — PARTS & OPERATION MANUAL — REV. #5 (03/14/05) — PAGE 21
Generator Storage
For storage of the generating set for over 30 days, the
following is required:
z Drain the fuel tank completely.
z Run the engine until the GLWsoline in the carburetor is
completely consumed.
z Completely drain the oil from the crankcase and refill
with fresh oil.
z Remove the spark plug, pour 2 or 3 cc of SAE 30 oil
into the cylinder and crank slowly to distribute the oil.
z Slowly rotate the engine a few times with the starter
Rope and install a new plug.
z Pull out the starter rope slowly and stop at the
compression point.
z Clean all external parts of the generating set with a cloth.
z Cover the generating set and store in a clean, dry place.
GLW-180H — PREPARATION FOR LONG -TERM STORAGE