Maxi-Cosi PERLE 1443 - Manual (Page 9)

perle
™
7
To Attach Infant Car Seat
To avoid serious injury:
• Use ONLY Mico
TM infant car seat (not included) with this stroller (model 01443).
• Please refer to the manufacturer’s instructions for the use of your infant car seat.
• ALWAYS install car seat facing to the rear of the stroller.
• ALWAYS use the restraint system in the car seat.
WARNING
14 To Attach Mico TM Infant
Car Seat
Push the parking brakes down.
Close canopy. Recline seat.
Rotate car seat towers upward
until they “click” (Figure 14).
Car seat must be in rear-facing
position. Lower car seat into
car seat towers until both sides
“click.” Confirm that car seat is
locked by pulling up on car
seat handle (Figure 14a).
To Remove Mico TM Infant
Car Seat
Press both buttons on car seat
(Figure 14b). Lift car seat up.
Slide down releases and
rotate car seat towers down
(Figure 14c).
14
14b
14a
14c
Car Seat Towers