Miller Electric DC 650 - Manual (Page 8)

Litho in USA
Distributed by:
Ordering Information
Equipment and Options Stock No. Description Qty. Price
HDC 1500 A #300 439 With CE
HDC 1500 DX #300 438 With CE
RAD Drive Motors
RAD-400 #195 265 Standard-speed right-angle drive motor
RAD-780 #195 266 High-speed right-angle drive motor
Drive Rolls See chart on page 4
Flux Handling Equipment
Flux Hopper with Valve #194 775 25 lb capacity
Flux Recovery Systems See page 4
Torches
OBT 600 #043 923 600 amp, 100% duty cycle, air-cooled
OBT 600 Torch Body Extensions #043 967 1 inch
#043 969 2 inch
#043 973 4 inch
#043 975 6 inch
OBT 1200 #043 900 1200 amp, 100% duty cycle, air-cooled
OBT 1200 Torch Body Extension #043 981 9 inch
Contact Tips See chart on page 4
Accessories
Wire Straightener #199 733 For 1/16–7/32 in (1.6–5.6 mm) wire
Cross Slide #195 411 Provides 6-in travel adjustment, load capacity of 150 lb
Heavy-Duty Cross Slide #194 783 Provides 6-in travel adjustment, load capacity of 250 lb
Wire Reel #108 008 For 60 lb (27 kg) coil, requires Spool Support Assembly #119 438
Spool Support Assembly #119 438 Support for 60 lb reels
Cable Kit for HDC 1500 Controllers #195 308 Includes 30 ft (9 m) 14-pin interconnect cable and 10 ft (3 m) motor cable
Motor Extension Cable #195 342 25 ft (7.6 m) motor cable extension
Extension Cables #043 725 25 ft (7.6 m), 14-pin
#043 726 50 ft (15.2 m), 14-pin
#043 727 75 ft (22.9 m), 14-pin
Date: Total Quoted Price:
Recommended Power Sources
Summit Arc ™ 1000 #903 530 460 V, 60 Hz
#903 599 575 V, 60 Hz
Summit Arc ™ 1250 #903 570 400 V, 50/60 Hz
Sub Arc DC 650 #907 338 230/460/575 V, 60 Hz
Sub Arc DC 800 #907 344 380/400/440 V, 50/60 Hz w/CE
Sub Arc DC 1000 #907 342 230/460/575 V, 60 Hz
Sub Arc DC 1250 #907 343 380/400/440 V, 50/60 Hz w/ CE