beautypg.com

Warning/indicator lights and beep sounds – Mazda 2005 RX-8 User Manual

Page 142

background image

Black plate (142,1)

NOTE

If the battery is disconnected, the DSC
will be inoperable. In this case, the DSC
OFF indicator light flashes and the
TCS/DSC indicator light illuminates.
To make the DSC operable, do the
following procedure.

1. Turn the ignition switch to the ON

position.

2. Turn the steering clockwise fully,

then turn it counterclockwise fully.

3. Make sure the DSC OFF indicator

goes off.

4. Turn the ignition switch to the OFF

position, then turn it to the ON
position again.

5. Make sure the TCS/DSC indicator

light goes off.

If the TCS/DSC indicator light and the
DSC OFF indicator light remain
illuminated even after turning the
ignition switch to the ON position,
consult an Authorized Mazda Dealer.

qCruise Main Indicator Light

This light comes on when the ON/OFF
switch is pressed and the cruise control
system is activated.

qCruise Set Indicator Light

This light comes on when a cruising speed
is set.

qLight-On Indicator Light

This indicator light comes on when the
exterior lights are on.

qPower Steering Malfunction

Indicator Light

This indicator light illuminates when the
ignition switch is turned to the ON
position and goes off when the engine is
started.

If this light illuminates while driving, it
indicates a malfunction of the power
steering system. Consult an Authorized
Mazda Dealer.

5-46

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

RX-8_8T69-EA-04G_Edition1 Page142
Wednesday, June 9 2004 2:12 PM

Form No.8T69-EA-04G