MIDLAND BT2 - Manual (Page 16)

16
LIGHT AND SOUND SIGNALS
LED indication Status
GENERAL
None Unit is switched off or full charged when connected to the power supply
Single Blue flash every 3 seconds Unit being turned on
Triple red flash Unit being turned off
Single Blue flash every 3 seconds
Single Red flash every 3 seconds Standby
Standby - low battery
RED and BLUE (together) every 3
seconds Active (Intercom, phone call or Bluetooth connection in progress)
RED and BLUE (together) and one flash
of RED light every 3 seconds Active but low battery
Single red flash every 2 seconds Unit in charge when connected to the power supply
SETUP
Steady Red Setup mode
Rapid Red-Blue alternating flash Pairing mode (searching for devices)
Steady Blue for two second Successful pairing/ Reset paired devices/Three way enabled
Blue light two time long flash Three way disabled
Audio signals Status
Ascending tone (low-high) Unit being turned on
Descending tone (high-low) Unit being turned off
Enable/Disable the Intercom 1 tone = enabled / 2 tones = disabled
1 tone Specific feature turned on
2 tones Specific feature turned off
UNIT FUNCTIONS
If you want to... …do this
GENERAL
Turn on the unit Press the Intercom button for 3 seconds at least (start Blue flash)
Turn off the unit Press the Intercom and AUX button together for 3 seconds (triple Red flash)
Increase the volume Short or continues press on the Volume Up control