Meridian America M2008HF - Manual (Page 38)

Selectable Conferee Display and Disconnect
You can view the list of active conferees by using the Conferee Selectable
Display Key and disconnect any party that has been added to the conference
call.
To view active conferees:
1. While on a conference call, press the
Conferee Selectable Display Key. The LCD
indicator turns on. With each Key press,
the screen changes to show a different
active conferee.
Note: This action has no effect on the
displays of the other telephones
involved in the conference.
2. Press the Release Key. If configured, the
Conference Count Display returns. The LCD
indicator turns off.
To disconnect a conferee:
1. While a conference call, press the Con-
feree Selectable Display Key. The LCD
indicator turns on. Continue to press the
key until the conferee that is to be discon-
nected is displayed on the screen.
2. Press the DN Key on which the confer-
ence call is established. The selected
conferee is disconnected from the call.
3. If there are additional conferees to be
disconnected, press the
Conferee Select-
able Display Key until the conferee that is to
be disconnected is displayed on the screen.
4. Press the Release key. If configured, the
Conference Count Display returns and is
updated to reflect the revised total count of
conferees. The LCD indicator turns off.
To talk with more than one person: Conferee Display & Disconnect
32