Mitsumi electronic 6402 - Manual (Page 16)

12
OR, dial the Whisper Page access code.
2. When you hear dial tone, dial the extension of the other person.
The people on the other call hear a beep.
The person whom you have called may activate the Whisper Page
Answer feature by using either the feature access code or by pressing
and then the dial pad key on which the Whisper Answer
feature is administered. This will form a two-party speaking path with
your telephone. The other call is put on hold.
3. Speak with the person you have called.
4. When you are finished, the person whom you called can retrieve the
first call from hold, if he/she is using a 6402 or 6402D, by pressing and
then releasing the switchhook.
Note: A person can block interruptions from the Whisper Page feature
by deactivating the feature with the Whisper Page Off feature.
(This feature can be accessed while off-hook by using the
feature access code or by pressing
and then the
Whisper Page Off entry number or * or #.)
Using the Display on the 6402D
Note: The 6402D can be used only with a DEFINITY ECS Release 6.3 or
later.
Note: Only the 6402D telephone has a 2-line by 16-character display. The
basic 6402 telephone does not have a display.
The primary uses for the display on the 6402D telephone are:
• Viewing the time and date, which is the usual display. (See Figure 4.)
• Using the Call Timer or the Timer feature (if administered on your dial pad)
which shows elapsed time on a call. (See Figure 4.)
FIGURE 4 Date, Time, and Timer on the 6402D Display
• Viewing call-handling information.
As you dial a telephone number, the individual digits are immediately
shown on the display as you dial them. When you dial an extension, that
number is shown and then replaced by the called party’s name. (If there is
not space for the full name, as many letters of the name as possible will
be shown on the display.)
When a call is received from another extension, the caller’s name is
shown; when a call is received from outside, “OUTSIDE CALL” or a trunk
identifier is shown.
• When you set the handset, speaker, or ringer volume, the display shows
Feature
Feature
10:19am 3/27/98 Time and date
Timer screen screen
0:09:07