beautypg.com

Focus lock using the built-in flash – Minolta Dynax 5 9222-2163-11 User Manual

Page 18

background image

35

AUT

OMA

TIC

OPERA

TION

34

Center your subject in the wide
focus frame

, then press

the shutter-release button
partway down to lock the
focus.

• When

appears in the viewfinder, the

focus is locked.

• Focus lock also sets the exposure

settings.

When

appears in the viewfinder in full-auto, the built-in flash pops-up

automatically when the shutter-release button is pressed partway down.
Once the flash is up, it will fire when necessary.

• The shutter will not release until the flash is charged.
• To turn off the autoflash, select flash cancel

.

• Pressing the program-reset button resets the flash to autoflash mode.
• Push down the built-in flash when the camera is not in use.

Flash signals in the viewfinder indicate
the status of the flash.

• When

does not blink after taking the picture, the subject was not within

the flash range. Please check the flash range on the next page.

Flash Signals

Eye-start

ON

Eye-start

OFF

Flash is needed.

Flash is charging.

Flash is ready.

The flash exposure was
confirmed.

Steady

Steady

Blinks

Disappear

s

After taking the

picture

Action

Signal

Indicated Flash Status

Pressing the
shutter-release
button
partway
down

Composing the
picture

After taking the

picture

Pressing the
shutte- release
button partway
down

Built-in flash

pops-up

Built-in flash

pops-up

Flash is needed.

Flash is charging.

Disappears

Flash is ready.

Steady

The flash exposure was
confirmed.

Blinks

Continue to hold the shutter-
release button partway down
while you compose your
picture.

Press the shutter-release
button the rest of the way
down to take the picture.

• Removing your finger off the shutter-

release button cancels focus lock.

The focus-lock function is used when the
subject is off-center and outside the focus
frame. Focus lock may also be used when
a special focusing situation prevents the
camera from focusing on the subject.

• Focus lock cannot be used with

continuous AF. The spot AF button (p.69)
can also be used for focus lock.

• Focus can be locked in continuous AF

(p.73) with the spot AF button.

FOCUS LOCK

USING THE BUILT-IN FLASH

1

2

3

9222-2163-11 MM-B108 (E).qxd 01.8.3 16:11 Page 34