Midland Radio All Hazards Alert Weather Radio with S.A.M.E WR-120 - Manual (Page 2)

page 1 www.midlandusa.com
English
François
Español
WR-120 Owner’s Manual
Quick Start Instructions:
1. Set the ON/OFF switch located on the right side of the radio to the ON position.
2. Pull out antenna and extend to its full length.
3. Insert 3 AA batteries (not included).
4. Plug the AC Adapter into the POWER jack on the back of the radio and the other
end into a standard outlet.
5. Follow the prompts on the display screen using ▲ and ▼ to move through the
options and SELECT to choose the desired option.
• The radio will first display WELCOME, and then SET LANGUAGE
• To SET LANGUAGE press the SELECT button:
- Choose your language by pressing ▲ or ▼, then SELECT.
• To SET LOCATION press the SELECT button:
- Press ▲ or ▼ until SINGLE is displayed, then press SELECT.
• To SET COUNTRY press SELECT to program your county for position 01:
- Press ▲ or ▼ to choose your country, then press SELECT.
- Press ▲ or ▼ to choose your state or province, then press SELECT.
- Press ▲ or ▼ to choose your county or area, then press SELECT.
• To SET TIME press the SELECT button:
- Set the time using ► ▲ ▼ and ◄ then press SELECT.
• To SET CHANNEL press the SELECT button:
- Tune the channel to the desired broadcast using ▲ or ▼
• To SET VOLUME press the VOLUME UP or VOLUME DOWN buttons.
6. To complete set-up, press the SELECT button.
Menu
Volume
Up
Volume
Down
Select
Directional
Pad
ON/OFF
Switch