Morphy Richards 760 - Manual (Page 7)

S Slliic ciin ng g a an nd d s sh hrre ed dd diin ng g b blla ad de es s
1 Place the blade of your choice
on the blade holder Í,
inserting the longer tab on the
side on the blade first.
2 Press the other end of the
blade until it ‘clicks’ into place.
3 Fit the processor bowl and
spindle as detailed previously.
4 Using the finger holes in the
blade holder, fit it over the
spindle and press firmly into
place as indicated.
WARNING: USE
EXTREME CAUTION -
BLADES ARE SHARP.
5 Fit the lid and click into place
as detailed in the ‘Setting up’
section.
6 Plug in the processor.
7 Use the food pusher
Á to add
food into the processor bowl
through the feeder tube.
C Ch hiip pp piin ng g b blla ad de e Ô
1 Fit the processor bowl and
spindle as detailed previously.
2 Using the finger holes in the
chipping blade, fit it over the
spindle and press firmly into
place as indicated.
WARNING: USE
EXTREME CAUTION -
BLADES ARE SHARP.
3 Fit the lid and click into place
as detailed in the ‘Setting up’
section.
4 Plug in the processor.
5 Use the food pusher
Á to add
food into the processor bowl
through the feeder tube.
C Ciittrru us s jju uiic ce err
1 Fit the processor bowl as
detailed previously.
2 Fit the citrus press bowl Ù
into the processor bowl.
3 Rotate anti-clockwise. Ensure
that the citrus press bowl tab
has ‘clicked’ into place.
4 Insert the citrus cone ı into
the centre of the citrus press
bowl, with its shaft inside the
central column of the bowl.
5 Plug in processor
6 Place fruit on citrus cone and
hold with a cupped hand.
7 Turn speed control to MIN.
WARNING: ALWAYS
OPERATE THE JUICER
AT MINIMUM SPEED
ONLY.
7