Miele G 803 - Manual (Page 34)

Additional features
Heated drying
In all wash programs a heater element aids in drying. Heated drying is preset to
be activated.
Dishes are then dried with residual heat. Open the dishwasher door a few inches
at the end of a program to speed drying.
Activating and Deactivating Heated drying
Procedure... lights flashes
^ Open the door.
^ Turn the dishwasher off with the “Off” (o) button.
^ Press buttons
b
and
d
simultaneosly and at the
same time turn the dishwasher on with the “On” (
g)
button.
On Salt
^ Release buttons
b
and
d
. On Salt +
c
Note: If any other indicator light is flashing ,
the process must be repeated.
The following indicator lights may also light , if:
– rinse aid was never added or needs to be refilled. Rinse aid
– Heated drying has been deactivated
b
– the water intake time has been increased
(see “Increase water intake time”)
d
– End of program buzzer is deactivated.
e
Operating the dishwasher
34