Melissa 246-006 - Manual (Page 10)

Please read all instructions before operating your
new electric food slicer. We suggest that you save
the instruction manual for later use.
IMPORTANT SAFEGUARDS
When using electrical appliances basic safety
precautions should always be followed, including
the following:
- Read all instructions
- To protect against risk of electrical shock, do
not put power unit in water or other liquid.
- Close supervision is necessary when any
appliance is used by or near children.
- Unplug from outlet when not in use, before
putting on or taking off parts, and before
cleaning.
- Avoid contacting moving parts. Never feed
food by hand. Always use completely
assembled slicer with food plate and feeder.
- Do not operate any appliance with a
damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in
any manner.
- The use of attachments not recommended or
sold by the appliance manufacturer may
cause fire, electric shock or injury.
- Do not use the appliance outdoors.
- Do not let cord hand over edge of table or
counter or touch hot surfaces.
- Blade is sharp. Hold only by blade lock.
Handle carefully when cleaning.
- Do not use the appliance for other than its
intended use.
LIST OF COMPONENTS
1. ON- switch
2. Safety switch
3. Motor assembly
4. Blade
5. Slice thickness adjustment knob
6. Food press plate
7. Base
8. Food tray
9. Feeder
10. Power cord set
11. Plastic cutting board
USING THE FOOD SLICER
Before using first time, you should clean the
blade, the food plate, the feeder and the tray
under runing water. See CLEANING.
- Unwrap cord from bottom of slicer, and slide
into slot.
- Position slicer on a clean, dry and smooth
surface.
- To turn the appliance on, first pushing the
safety switch. Then without releasing the
safety switch press down the On-switch.
Keep pressing down the On-switch during
slicing. Be very careful when operating the
appliance.
- To turn off the appliance, release your hand
pressing the On-switch. The On-switch will
spring up and the safety switch will return to
position 0 automatically. The slicer will stop.
- Place the food tray on the side of the
appliance to collect the food.
- Set the desired cutting thickness by turning
the slice thickness adjustment knob. Settings
from 0-15 mm can be chosen. Always return
10
UK
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
1.
TSK-962_rev_IM 14/10/03 16:09 Side 10