Miele CVA 2660 - Manual (Page 27)

There are four programmable levels:
Setting
(in the
machine)
Hardness
level
(local water)
°d mmol/l Water
through-flow
in litres
Hardness 1 1 (soft) 0 - 3 0 - 0.6 approx. 200
Hardness 2 1 (soft) 4 - 7 0.7 - 1.3 approx. 130
Hardness 3 2 (medium) 7 - 14 1.3 - 2.5 approx. 90
Hardness 4 3 (hard)
4 (very hard) 14 - 21
above 21
2.5 - 3.8
above 3.8
approx. 60
SETTINGS F
K 1 2 3 4 5 L o n G k C
^ Turn the left-hand dial until you reach the "Settings" menu.
PROGRAMMING
F Y K n I I J Z
^ Turn the right-hand dial until the "Programming" symbol is
highlighted and then press the dial to confirm your
selection.
WATER HARDNESS
n IA M T U N A
^ Turn the right-hand dial to the "Water hardness" option and
then press the dial to call up the settings.
WATER HARDNESS
very hard - 4 B ~
^ Turn the right-hand dial to set the water hardness level you
require.
A tick will appear as confirmation of the current setting.
^ Press the right-hand dial to save your setting.
The exit menu will now appear with the
A symbol for "Back"
highlighted.
Settings: Customising your machine
27