Monessen Hearth Unvented Vent-Free Fireboxes BUF500 - Manual (Page 13)

61D1013 13
CANOPY INSTALLATION
INSTALLING CANOPY
A canopy is furnished with each firebox and MUST be installed for safe operation. See Figure 14.
1. Locate three (3) holes at the top of the front frame. See Figure 13.
2. Align the canopy with the holes in the top of the frame.
3. Secure canopy to front of frame with screws provided. See Figure 13.
The firebox canopy must not be
modifi ed or replaced with a canopy
that may be provided with the unvented
decorative room heater.
W
ARNING
Close fi replace screen panel before
operating a decorative type unvented
room heater.
W
ARNING
Figure 13 - Installing Canopy
Canopy
Screws
Front
Frame