Meyer Sound M1D - Manual (Page 30)

24
APPENDIX B
AC POWER
AC power connector
PowerCon with looping output
Voltage selection Automatic
Safety agency rated
operating voltage
100 V AC - 240 V AC; 50/60 Hz
Turn on/turn off points Continuous 90 V AC - 264 V AC;50/60 Hz
Note: No automatic turn-off voltages. Voltages above 264 V AC are fuse protected but
may cause permanent damage to the power supply. Voltages below 90 V AC may result in
intermittent operation.
Current Draw
Note: Current draw for a single loudspeaker. Loop out not used.
Idle current
0.41 A rms (115 V AC); 0.33 A rms (230 V AC); 0.420 A rms (100 V AC)
Max. long-term continuous
current (>10 sec)
3.2 A rms (115 V AC); 1.6 A rms (230 V AC); 3.7 A rms (100 V AC)
Burst Current (<1 sec) 5.0 A rms (115 V AC); 2.5 A rms (230 V AC); 5.8 A rms (100 V AC)
Ultimate Short-Term Peak
Current Draw
17 A pk (115 V AC); 8.5 A pk (230 V AC); 20 A pk (100 V AC)
Inrush Current 15 A pk (115 V AC); 13 A pk (230 V AC); 15 A pk (100 V AC)
RMS NETWORK
Equipped for two conductor twisted-pair network, reporting all operating parameters of
amplifiers to system operator’s host computer.
PHYSICAL
Enclosure
Multi-ply hardwood
Finish Black textured
Protective grille Powder-coated hex stamped steel
Rigging QuickFly MRF-1D-Sub rigging frame with links and quick release pins
Dimensions 22.62” W x 13.00” H x 17.50” D (589 mm x 330 mm x 445 mm)
Weight 70 lbs (31.75 kg); shipping 75 lbs (34 kg)
17.50
[445 mm]
22.62
[575 mm]
8.50
[216 mm]
6.50
[165 mm]
13.00
[330 mm]
11.06
[281 mm]