Morphy Richards FP48988 - Manual (Page 3)

3
4
Plug the Accents Table Blender into the mains.
3 3
Place the Lid (2) on the Glass Jug, pushing
down firmly. Place the Measuring Cap (1) into
place twisting clockwise to lock into place.
2
Place the food or cold liquids into the Glass
Jug. Do not exceed more than 1L.
1
Place the Glass Jug (3) onto the Base Unit (6).
For ease of use, there are 6 positions for the
Jug to sit on the Base Unit.
• Carefully unpack your Accents Table Blender as
the Blending Blades (4) are very sharp.
• Remove any stickers (except for the serial label)
and wash all the parts that are safe to immerse in
water.
• WARNING: Never immerse the Base Unit in
water or in any other liquid. Always ensure the
electrical connections are kept dry. This may be
wiped with a clean, damp cloth. But only when
unplugged from the electrical socket.
DO NOT ADD HOT LIQUID TO THE JUG.
ALLOW TO COOL FIRST.
Before first use
IMPORTANT
6
To use the pulse function turn the Control Dial
to P. Do not use for prolonged periods of time.
5
Turn the Control Dial (7) to 1 to start blending.
Increase the speed as required.
Using your Accents Table
Blender
48988 rev2_Layout 1 02/09/2011 09:49 Page 3