Memorex iMove MI3005 - Manual (Page 8)

7
INSERTING AN IPOD ®
Plug the unit in or insert batteries as
described on page 6.
+ – + – + – + –
+ – + – + – + –
1
Locate the correct iPod ® holder to
use as shown on pages 11-12. Slide
the holder downward as shown to
insert.
2
If using the dock: With the iPod ®
and the Mi3005 OFF, insert the
iPod ® onto the holder. Gently push
down so the connector on the iPod ®
slides onto the connector on the
Mi3005. Press the Power button (as
shown in Step 1 on the next page) to
turn on the unit and iPOD will appear
in the display. Then the iPod ® will be
in the Pause mode.
3
If using the LINE IN jack: With the player
OFF, insert an audio cable (not included)
into the LINE OUT jack on your player and
insert the other end into the LINE IN jack
on the rear of the Mi3005. Press the Power
button (as shown in Step 1 on the next
page) to turn the unit on and repeatedly
press the MODE button to select the LINE
IN mode (LINE IN will appear in the
display). The player's output sound will be
heard through the Mi3005's speakers.
4
NOTES:
• If the unit is already turned ON and in AM/FM mode, if you insert the iPod ® into the dock or
connect an external unit to the LINE IN jack, the unit will automatically switch to iPod or LINE IN
mode. If you disconnect the iPod ® or the external unit, the unit will revert back to AM/FM mode.
• CHARGING: When the iPod ® is inserted into the dock and the unit is operating on AC power
(with the power off or on in any mode), the iPod’s ® battery will charge. If using batteries, the
iPod’s ® battery will not charge.
• CHANGING THE MODE: If units are connected to the dock AND the LINE IN jack, you can
press the MODE button repeatedly to select between iPod (dock)/LINE IN/AM/FM mode as
desired. (You will not be able to select between iPod/LINE IN mode, if there is no device or
iPod ® connected to the LINE IN jack or the iPod ® dock.) To turn off the unit, press the Power
button.
• BACKLIGHT: When using an AC adapter, when the unit is on, the LCD backlight will always be
on. When using batteries, when the unit is on, the backlight will light for 10 seconds then turn
off. Also, the backlight will light for 10 seconds if you press any button on the unit.