Manley NEO-CLASSIC SE / PP 300B AMPLIFIER - Manual (Page 10)

SPECIFICATIONS
Vacuum Tubes: 2 x 300B (Output), 1 x 6SN7 (Driver),
1 x 6SL7 (Input) 2 x 5U4 (Rectifier)
Output Power @ 1Khz SINGLE-ENDED: 5 dB FB - 11 Watts @ 3% THD.
PUSH-PULL: 5 dB FB - 24 Watts @ 1.5% THD.
Frequency Response +/- .5 dB SINGLE-ENDED: 5 dB FB - 15 Hz - 15 Khz
(measured at 5 watts) PUSH-PULL: 5 dB FB - 10 Hz - 20 Khz
Input Sensitivity @ 5db FB SINGLE ENDED: 700mV.
PUSH-PULL: 450mV.
S/N Ratio SINGLE ENDED: 83.5dB Ref. 1W; 2.83v//8 ohms,20Khz BW; 5dB FB.
PUSH-PULL: 85.4dB Ref. 1W; 2.83v//8 ohms; 20Khz BW; 5dB FB.
Dynamic Range SINGLE ENDED: 94dB Ref. 3% THD; 20KHz BW; 5dB FB.
PUSH-PULL: 99.5dB Ref. 1.5% THD; 20KHz BW; 5dB FB.
Input Impedance 1 M Ohm, direct coupled.
Load Impedance 4 to 12 Ohm appropriate for 4 & 8 ohm speakers
12 to 20 Ohm appropriate for 16 ohm speakers
Power Consumption 240 Watts
Mains Fuse 100, 110, 120V 3 A (Slo-Blo)
220, 240 V 1.5 A (Slo-Blo)
B+ Fuse 400 mA, (Slo-Blo) Ceramic Body.
Lamp 1/4" X 1 1/4" Linear lamp - 8 volt, 0.3 amp
Dimensions W= 8.5, D= 11, H= 9 inches,
Including projecting controls & parts.
Shipping Weight 41 lbs. Each.