Miele H 4744 BP - Manual (Page 62)

The oven must be installed into
cabinetry before use.
Do not insulate the cabinet. This will
prevent proper ventilation.
,
IMPORTANT INFORMATION
Certain cabinet materials and
finishes are very sensitive to high
temperatures. To eliminate the risk
of damage to surrounding cabinets,
a 24 square inch (2"x12") [150 cm
2
]
minimum opening must exist in the
cabinet to allow air to flow into and
around the appliance. In addition,
the oven vent at the bottom of the
door must not be obstructed.
^ Connect the oven to the electrical
supply.
The oven must be supported from
underneath.
^ Place the oven into the cabinet as far
as the oven trim and align.
^ Open the oven door and locate the
two mounting screw holes in the oven
frame. Mark and drill 6 mm pilot
holes. Secure the oven to the
cabinetry by inserting screws through
the frame and into the cabinetry.
Only operate the appliance after it
has been installed into the cabinetry.
Installing the oven
62