Miele B 890 - Manual (Page 22)

Shirts
^ Remove the feed board to iron shirts.
1. Shoulder yoke
^ Arrange the yoke, collar first, on the
roller and smooth out.
^ Hot press the yoke.
2. Collar
The collar is ironed on both sides using
the left hand end of the roller.
^ Then turn down the collar and press
lightly, holding taut.
3. Front sides
^ Lay the button hole front on the left
hand end of the roller with the side
seam along the edge of the roller.
^ Iron from the button hem up to the
armhole.
^ Now move the shirt out and iron past
the armhole to the side seam.
^ Iron the button side inside out so the
buttons are pressed into the
cushioned surface of the roller.
Tips on ironing
22