Musical Fidelity M6 - Manual (Page 17)

Issue 1 July 2009 Page 17 of 18
Output
Output impedance 50 ohms balanced or single ended
Output, digital 0dB level XLR output - 4.4V r.m.s. balanced nominal
RCA output - 2.2V r.m.s. single ended nominal
DAC ( balanced and single-ended outputs)
DAC circuit 24 bit Delta-Sigma (bit stream) dual differential 8x over-sampling
Total correlated jitter <135 picoseconds peak to peak
Linearity <0.1dB down to -96dB
Frequency response 10Hz to 20 kHz -0.2dB max.
Channel separation >105dB 20 Hz to 20 kHz
Signal-to-noise ratio >117dB “a”- wtd.
Total harmonic distortion <0.003% 10Hz to 20 kHz
Connections
Line level outputs 1 pair line level RCA connectors, left and right outputs
1 pair line level XLR connectors, left and right outputs
Digital outputs 1 RCA coaxial connector SPDIF
1 TOSLINK optical connector
Digital inputs 1 RCA coaxial connector SPDIF
1 TOSLINK optical connector
USB input USB type “B” (square) socket
Power requirement
Mains voltages 115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
Consumption 20 Watts maximum
Weight
Unit only, unboxed 11.2 kg (248 lbs)
In shipping carton 15.5 kg (34 lbs)
Dimensions
Wide 440 mm (179”)
High, including feet 125 mm (5”)
Deep (front to back) including terminals 385 mm (15:”)
Standard accessories
IEC type mains lead (10-Amp type)
M6 remote control
Batteries, LR03 or AAA, manganese alkaline type - 2 off
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.
SPECIFICATIONS