Miele G 7856 - Manual (Page 31)

Setting the dosage
Set the dispensing amount according
to the detergent manufacturer's
recommendations and the
applications.
The machine needs 7 liters of water in
the program cycle "Main wash".
Example:
The detergent manufacturer
recommends 4 ml of detergent per liter
water.
7 l x 4 ml/l = 28 ml.
2 ml per 1 sec dispensing time;
i.e. programming to 14 secs.
^ Turn the program selector to "Short"
the dispensing time in seconds is
displayed, e.g "10".
^ Press and hold "Display" until "14" is
displayed (dispensing time 14 secs
per 28 ml, see example above).
The dosage time / dosage amount is
set.
Having changed a value or all values:
^ Press the "Start" button. "SP" is
displayed.
^ Press the "Start" button again. The
change has been saved.
Value set:
If the dispensing system was also
vented:
^ Start the "Rinse" program, so that
after venting any agents in the wash
cabinet are diluted before being
drained away.
Programming special functions
31