Metz MZ-1i - Manual (Page 16)

27 26
7. Metz cordless TTL remote operation
Indication that flash readiness has been reached is particularly important for
TTL remote operation. If flash readiness is established, the AF measuring beam
ᕧ on the slave gives brief light pulses and the flash-ready indicator ተ is lit.
Switching off the Metz TTL remote operation:
• Press the Remote button
ብ on the controller twice.
• On the slave unit:
Switch off the flashgun, remove the Slave Adapter SCA 3080 and switch on
the flashgun again.
In the Metz A remote mode the master flashgun (controller) mounted on
the camera controls the slaves in such a manner that automatic operation
covers all slave units. The exposure is controlled by the sensor
ᕦ on the
controller. To implement this mode, all 40 MZ-.. slave units must first be
fitted with an SCA 3080 Slave Adapter (available as an optional extra).
50 MZ-5 slaves do not require a slave adapter.
7.1 Metz cordless auto remote operation
Ǻ
50 MZ-5
Controller
adj. to A
Controller
adj. to A
A-Remote-Operation
50 MZ-5
SCA 3_ _ _
SCA 300 D
nur bei
SCA 312/2AF
SCA 332/2AF
SCA 333/2AF
SCA 346/2AF
SCA 356
SCA 374/2AF
SCA 381/2AF
SCA 3_ _
SCA 300 D
onlly with
SCA 312/2AF
SCA 332/2AF
SCA 333/2AF
SCA 346/2AF
SCA 356
SCA 374/2AF
SCA 381/2AF
SCA 3_ _
40 MZ-1(i)
40 MZ-3
adj. to A
40 MZ-1(i)
40 MZ-3
adj. to A
40 MZ-1(i)
40 MZ-2
40 MZ-3
adj. to TTL
SCA 301
SCA 301
50 MZ-5
Slave
SCA 3080
SCA 3_ _ _
Controller
Slave