Marantz RC5400 - Manual (Page 50)

User Guide
46
Reference
Choosing Another Channel
When you notice RF interference or unreliable operation you should
try choosing another channel to operate your devices.
Note All devices you want to operate with RF signals use the same
channel. If you choose another channel for one device, the Remote
Control will automatically change the channel for all devices that
work with RF signals.
1 Switch back to IR / RF mode. The Device list box will appear.
2 Select a device that is set with RF signals.
The IR / RF setting page appears.
3 Tap the + and - buttons beside the Channel label to change
the Channel number.
The RC5400 offers 4 RF Channels.
Note The Channel (CH) on the RF Extender has to match the Channel
on the Remote Control.
4 Tap the Done button to finish.
If you want to personalize your RC5400 even more, beyond its
standard programming features, Wizz.it is the tool for you to use.
Wizz.it is the RC5400
’ s companion software that you can download
from the following internet address;
http://www.marantz.com
With Wizz.it, you can;
Add, delete, move and modify control pages, devices and
commands anywhere on the touch screen.
Save, duplicate and share configuration files, codes or devices
with other RC5400.
Preview new configuration files on Wizz.it Simulator. In this
way you can check how the RC5400
’ s interface will look like.
8. Software