METRObility Optical Systems Radiance Sonet Single Interface Line Cards R125-34 - Manual (Page 4)

4
Overview
The Radiance SONET single interface line card provides seamless
integration between fiber optic multimode and singlemode segments in OC-3/
STM-1 or OC-12/STM-4 networks. Use the card’s singlemode connector to
extend your network reach up to 40 km.
The Radiance line card is manageable through console commands, Metrobility’s
GUI-based NetBeacon
® or WebBeacon software, or any SNMP application. This
ability provides software control over the card’s configuration and notification
of a failure to a management station.
The Radiance SONET single interface line card offers the following key
features:
• Two Link Loss Return (LLR) switches and Link Loss Carry
Forward (LLCF) to aid in troubleshooting remote network
connections.
• Full-duplex support.
• OC-3/STM-1 (155Mbps) and OC-12/STM-4 (622Mbps) support.
• A link LED on each port to indicate that the port is receiving a
signal.
• Reliable data transmission over multimode cables up to 2 km and
singlemode cables up to 40 km.