Mpm series, Medium temp open display merchandisers, Plan view side view elevation view – Master Bilt MPM-27 User Manual
Page 2: Recommended operating conditions
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
MPM SERIES
MEDIUM TEMP OPEN DISPLAY MERCHANDISERS
TECHNICAL SPECIFICATIONS
LISTINGS
HOOKUP
BID SPECIFICATIONS
Item no. MPM-_______________
Provide_______________( ) Medium
Temp Open Display Merchandiser(s), Mas-
ter-Bilt model no. MPM-__________.
Merchandiser to be constructed of 24
gauge painted textured galvanized steel in-
terior and exterior with removable two tier
315-1/12-web
©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.
MPM-36 and MPM-48 via plug-in, 9 foot
long, flexible three wire 14/3 cord with
molded plug. MPM-72 model hardwired.
PLAN VIEW
SIDE VIEW
ELEVATION VIEW
stainless steel display deck and stainless
steel floor. Other standard features include
full length 8
3
/
4
" wide laminated white
formica counter top, front bumper guard,
automatic defrost, on/off power switch
(MPM-36 and MPM-48 only), black vinyl
trim and have foamed-in-place “zero ODP”
urethane insulation. The temperature range
of the merchandiser will be 34° to 41°F (1°
to 5°C). Merchandiser to have standard lim-
ited three year extended compressor war-
ranty and two year limited parts and labor
warranty. Merchandiser to be UL and C-UL
listed and UL EPH classified.
NEMA 5-15P (MPM-36)
NEMA 5-20P (MPM-48)
MODEL
DIMENSIONS
(in.)
DIMENSIONS
(mm)
VOLTS
AMPS
UNIT
H.P.
CAP.
CU. FT.
SHIP
CU. FT.
SHIP
WT.
LB/KG
L
D
H
L
D
H
MPM-36
36
30
1
/
2
43
1
/
4
914
787
1099
115
10.3
1/3
3.7
41.0
310/141
MPM-48
48
30
1
/
2
43
1
/
4
1219
787
1099
115
15.5
1/2
5.1
53.0
410/220
MPM-72
72
30
1
/
2
43
1
/
4
1829
787
1099
115
15.8
3/4
7.9
86.0
590/268
NOTE: All specifications subject to change without notice.
RECOMMENDED OPERATING CONDITIONS
• Merchandisers designed to hold product
in the 34° to 41°F (1° to 5°C) range
• Designed to operate in air-conditioned
stores where the maximum temperature
is 75°F and the maximum relative
humidity is 55%
• Should not be installed in direct sunlight
• Should not be installed near HVAC vents,
fans or doorways that will disrupt airflow
and compromise the function of the air
screen inside the case
• Bottom shelf should not be loaded such
that the front air intake is obstructed
• Factory installed controls should not
be altered, removed or replaced without
consent of the factory
• Product must not be displayed in the cold
air curtain