Motorola MBP8 - Manual (Page 7)

GETTING STARTED 7
2. GETTING STARTED
Baby monitor power supply
1. Choose a proper location with easy access to a mains
socket.
2. Plug the baby unit into the mains socket in your
baby's room. Ensuring sufficient clearance is given for
it to detect sound and no more than 1 metre from the
babies cot.
3. Plug in the parent unit where you want to monitor your
baby.
3. USING YOUR BABY MONITOR
Please read these instructions carefully, and be aware
that this baby monitor is only intended as an aid. It is not
a substitute for responsible, correct parental supervision.
3.1 Power on/off the parent unit
1. When the parent unit is off, press and hold 0 until the
Link Indicator is on. The parent unit is now powered
on and will search for and link itself to the baby unit.
2. When the parent unit is on, press and hold 0 until the
Link Indicator turns off. The parent unit is now
powered off.
3.2 Power on/off the baby unit
When the baby unit is off, press and hold 0 until the
Power Indicator is on. The baby unit is now powered on.
When the baby unit is on, press and hold
0 until the
Power Indicator turns off. The baby unit is now
powered off.
NOTE
Do not place the parent and baby units too close together,
or you may hear a high pitched noise. This is not a fault.
The units are designed to be operated at some distance
apart, e.g. in separate rooms.
Wall Socket UK Plug