beautypg.com

Melissa 646081 User Manual

Page 15

background image

15

KEY TO MAIN COMPONENTS OF THE APPLIANCE

1. Blender glass with scale
2. Blade
3. Motor section
4. On/Off button
5. Cap
6. Blender glass lid
7. Pouring spout

PRIOR TO FIRST USE
• Before using for the first time, or after prolonged

storage without use, wash any parts that will come
into contact with food.

• Spare cord can be wrapped around the cord

storage holders at the bottom of the appliance.

USING THE APPLIANCE
1. Place the motor section (3) on a level surface, e.g. a

kitchen counter, and make sure it is standing firmly
on the four suction cups underneath.

2. Place the blender glass (1) on the drive shaft of the

motor section, making sure that the notches at the
bottom of the glass match the pins at the bottom of
the motor section.

3. Lift the blender glass lid (6) (can be a bit tight).
4. Pour food into the blender glass.
o NOTE: Never add liquid or food above the “1,500
ml” mark on the blender glass.
5. Press the lid firmly onto the blender glass. The

curved edge should be above the handle, opposite
the pouring spout (7). Place the cap (5) in the hole
in the lid and turn anti-clockwise until it locks into
place.

6. Plug in and switch on the power.
7. Place a hand on the lid and switch on the appliance

by turning the On/Off button (4) to “1” (low speed) or
“2” (high speed).

8. The appliance also has a pulsing option with extra

speed.

o Turn the On/Off button to “P” and hold it briefly
in that position.
o When you release the button, it reverts to “0”
and the appliance stops.

9. You can add more food to the blender glass during

operation through the opening in the lid. Always
switch off the appliance before removing the cap
and adding more food.

10. Turn off the appliance by turning the On/Off button

to “0” when you have finished blending. Wait until
the blade (2) has come to a complete stop before
removing the blender glass lid.

NOTE:
• Do not leave the appliance running non stop for

more than 1 minute at a time. If the appliance has
been running for 1 minute, allow it to cool down for
1 minute before you use it again.

• Always add liquid to the blender glass when

crushing ice cubes.

Tips!
• The cap is equipped with a scale and can be used

as a measuring cup.

• Remember that fruit pulp can often be used, e.g. as

filling in carrot cake, vegetable lasagne, muffins, etc.

CLEANING
• Remove plug from the mains socket, and allow the

appliance to cool down before cleaning it.

• Do not immerse the motor section of the appliance

in water and make sure no water enters the
appliance.

• Clean the motor section by wiping it with a

damp cloth. A little detergent can be added if the
appliance is heavily soiled.

• Do not use a scouring pad, steel wool or any form of

strong solvents or abrasive cleaning agents to clean
the appliance, as they may damage the outside
surfaces of the appliance.

• The blender glass, lid and cap can be cleaned

in normal dishwater or in a dishwasher. All parts
must be completely dry before the appliance is
assembled and used again.

• Take care not to touch the blades at the bottom of

the blender glass during cleaning!

• Ensure the appliance is clean and dry before

storing.