MITSUBISHI ELECTRIC HC100 - Manual (Page 23)

EN-23
ENGLISH
3. FEATURE menu
ITEM
SETTING FUNCTION
MENU POSITION 2 positions Use to change the position of the menu.
CINEMA MODE AUTO The film mode will be automatically activated when a film source signal is
inputted.
OFF The film mode will not be activated.
VIDEO SIGNAL 8 positions When AUTO is selected, the appropriate video format is automatically
selected depending on the input signal. If the image isn’t displayed
correctly, select the desired video format manually.
ASPECT AUTO Select to change the aspect ratio automatically depending on the input
signal.
4:3 Select to project images with an aspect ratio of 4:3 when the input signal is
4:3 images.
16:9 Select to project images with an aspect ratio of 16:9.
EXPAND Select to enlarge and project images of CinemaScope size or Vista size.
PASSWORD FUNCTION Use to enable or cancel the password lock. See page 27 for details.
LANGUAGE 10 languages Use to select the language used in the menus.
RESET ALL Use to reset the settings of the menu (excluding PASSWORD FUNCTION,
and LANGUAGE) to the factory setting values.
4. SIGNAL Menu
ITEM
SETTING FUNCTION
HORIZ. POSITION * Use to adjust the horizontal position of the projected image.
VERT. POSITION * Use to adjust the vertical position of the projected image.
FINE SYNC. Use to eliminate flickering or blur, if appears, viewing the projected image.
TRACKING Use to eliminate vertical wide stripes, if appears, viewing the projected
image.
COMPUTER INPUT RGB Select this option when connecting the projector to high definition video
equipment having R, G, and B output terminals.
YC
B
C
R/
YP
B
P
R
Select this option when connecting the projector to a DVD player or other
device having Y, C
B
, and C
R
(or Y, P
B
, and P
R)
component video output
terminals.
SET UP OFF Select to make black area becomes lighter.
3.5%/7.5% Select to make black area becomes thicker.
• When 7.5% is chosen, the brightness is decreased by set-up cancel func-
tion for U.S. Choose OFF, when the image is darkness. (The default
setting is 7.5%.)
HOLD Use to adjust the image when flagging occurs near the top of the screen.
USER
CLAMP POSITION/
CLAMP WIDTH
Use to correct solid white or solid black in the projected image.
LPF Use to whether or not to enable the LPF.
• Though horizontal strips may appear on the enlarged projected image, such symptom is not a malfunction.
• Options marked with * become unavailable depending on the type of the input signal.
• When you change the horizontal or vertical position to a large extent, noise may appear.
• The adjustable range of the vertical position varies depending on the type of the input signal. Though the
image may stay in the same position even when the setting value is changed, such symptom is not a malfunc-
tion.