MIDLAND GXT1000 series - Manual (Page 13)

Page 13 www.midlandradio.com
Model GXT1000/1050 Series
SETTING THE CALLER ID NUMBER
You can select your individual 4-digit Caller ID Number to indicate you
when making “direct call” to other radios within your group. To set
your Caller ID Number within the current channel, Group Code and
ID number press the MENU button while in Group Mode 5 times, and
then press the buttons to select “1 ~ 9” on each digit. To move to
another digit press the MON/SCAN button. To confirm the selection,
press the PTT button or press MENU button again to move to the next
feature setting.
SETTING THE RING TONE
Your GXT1000/1050 has 5 selectable Ring Tone. Your selected ring
tone will be playbacked when receiving a “direct call” from another
person of the same Group Code and ID Number. To select a Ring
Tone for the current Group Code and ID Number press the MENU
button until an “rt” appears on the display, and then the buttons
to make the selection. To confirm the selection, press the PTT button
or press MENU button again to move to the next feature setting
MAKING A DIRECT CALL
Your GXT1000/1050 Series has a “direct call” function which
enables you to call another person without alerting the other people
within the group.
In order to make a direct call to another radio while in Group Mode,
both must have the same channel, Group Code, and ID Number.
To make a “direct call” press the CALL button while in Group Mode,
an “AL” will appear on the display. Press the buttons to select the
ID Number of the radio that you will call. Press again the CALL
button to send the direct call. Only the radio with the same ID Number
will receive the call.
You can also send a “direct call” to all the radio within the group.
Press the CALL button while in Group Mode, an “AL” will appear on
the display. Press again the CALL button to send the direct call and
all the radio within the group will receive the call.
/
/
/