MITSUBISHI ELECTRIC UNISEN 164 SERIES - Manual (Page 7)

7
For assistance call 1(800) 332-2119
Basic Setup and Operation
1
Remote Control
Two AA Batteries
AA
AA
Basic Owner’s Guide
Quick Setup Guide
Product Registration
Card
Power Cord
Cable Ties
Stand Screws (40- and
46-inch TVs only)
265 Series. Calibration
Microphone
Package Contents
Please take a moment to review the following list of
items to ensure that you have received everything.
Installing the Remote Control
Batteries
Remove the remote control’s back cover by 1.
gently pressing in the tab and lifting off the cover.
Load the batteries, making sure the polarities
2.
(+) and (-) are correct. For best results, insert
the negative (-) end first.
Snap the cover back in place. 3.
2
1
The remote
control
requires two
AA batteries.
Before You Begin
Review the important safety, installation, and oper- 1.
ating information at the beginning of this book.
Choose a location for your TV.
2.
• See the stand-installation or wall-mounting
requirements starting on page 5.
• Allow at least four inches of space on all sides
of the TV to help prevent overheating. Over-
heating may cause premature failure of the TV.
• Avoid locations where light may reflect off the
screen.
Install the batteries in the remote control. 3.
Plug the TV into an AC power outlet. 4.
TV power connection