Memorex MTT3200 - Manual (Page 8)

7
NOTES:
•
Programming is the ability to preselect the order in which a series of tracks will be played.
• Each track may be stored in the program memory as many times as desired (up to 30 tracks).
• If you attempt to program in more than 30 tracks, the display will show “Fu” (Full).
• As each track is played, its track number will be displayed. You can move forward or backward through
the programmed tracks with the SKIP/Search
or button.
• The CD player will stop after all programmed tracks have been played or the STOP (■) button is
pressed.
• To playback the program again, press the PROG button, then press the PLAY/PAUSE (Š/ ) button.
• To clear the program memory, press the STOP (■) button while in the Stop mode.
TO PROGRAM THE MEMORY (UP TO 30 TRACKS)
Slide the FUNCTION switch ❶ to
the CD position and press the CD
Open/Close button ❷. Place a CD
on the center spindle, with the
printed label side facing up. Press
the CD Open/Close button ❷ again
to close the CD compartment door.
1
2
1
Use the SKIP/Search ❶ or
❷ button to select the first
track to be programmed.
2
1
3
Press the PROG button; “01” will
appear in the display and the
Program indicator will blink.
2
Press the PROG button again; the
selected track has now been
programmed and counted as
program 1.
4
Press the PLAY/PAUSE (Š/ )
button to begin playback; the
Program indicator will light and
the tracks will play in the order
programmed.
6
Repeat steps 3 and 4 to program
the other desired tracks in
sequence (up to 30 tracks).
2
1
5
COMPACT DISC (CD) OPERATION (CONTINUED)
MTT3200 O/M.QXD 2/28/03 9:22 AM Page 7