Monte Carlo Fan Company 5ED56WAD Series - Manual (Page 4)

Install switch plate by placing over
the 2 screws and twisting into place.
Install screw removed and tighten all
3 screws securely.
20
Push plug from fan and plug from
switch plate together.
21
Put plug from fan through hole in
switch plate.
19
Install glass and finial nut.
26
Plug white wire from fan to white
wire from light kit. Then plug black
wire from fan to black wire from
light kit.
23
Place light kit over screws and twist
direction of arrow into place. Then
tighten all 3 screws securely.
24
Loosen 3 screw on light plate as
shown.
22
Install 3 x 40 watt candelabra bulbs.
Bulbs not included.
25