McIntosh MC275 - Manual (Page 15)

15
Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as de-
scribed and shown below.
The MC275 Vacuum Tubes must be removed from the Am-
plifier Tube Sockets and placed into the inside open-
ings of the four layer foam packing material. The foam
with the tubes located inside are placed into the Amplifier
Tube Cover and secured to the Chassis. Failure to do this
will result in damage to the Vacuum Tubes and possibly the
MC275.
It is very important that the four plastic feet are attached to
the bottom of the equipment. This will ensure the proper
equipment location on the bottom pad. Failure to do this
will result in shipping damage.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please call
or write Customer Service Department of McIntosh Labo-
ratory. Please see the Part List for the correct part numbers.
Quantity Part Number Description
1 034005 Shipping carton outside
2 033718 Foam Pad (side)
2 034266 Foam pack tube (ends)
2 034265 Foam pack tube (inside with
tube cutouts)
1 034006 Shipping carton inside
1 033707 Top pad
1 033712 Foam pad (tube cover)
1 033704 Bottom pad
1 033705 Front pad
1 033706 Rear pad
1 033711 Side pads
4 017862 Plastic foot