Millennium Enterprises Stereo150 - Manual (Page 84)

3. At this point, use the <2> knob to select the Bank to be named. Once the Bank has been selected, turn the <4> knob to rename the
Bank. The display now appears like this:
4. To exit the naming bank assignment, press the button.
5. Using the <1> knob, change the character to the one you want in the selected position.
6. When the correct character is displayed in that position, use the knob to scroll the cursor to the next character you want to
change.
7. Use the <2> knob to select numbers, the <3> knob to insert spaces and the <4> knob to copy and paste characters.
8. To copy a character, position the cursor under the character you want to copy (using the knob), then turn the <4> knob
clockwise. To paste the copied character, position the cursor where you want to paste the character, then turn the <4> knob counter-
clockwise.
9. To abort the procedure, push either the button to take you to Preset Mode, the button to take you to FX Edit Mode, or
the button to take you to Utility mode, depending upon which mode you want to enter.
Un-Linking or Viewing Parameter Control
1. To un-link or view a parameter that has been assigned to a footswitch, Expression Pedal or LFO simply press the button twice
The display will tell you which parameter is linked to which footswitch. To unlink, simply turn the <1> knob and the top line of the display
will now read:
Available Link
2. To see any other parameter links in the selected program, press the button twice and then turn the knob.
Name:Top 5 2
FACTORY USER
CAP 1
CHANGED LINK
nbr 2
CHANGED LINK
Ins 3
CHANGED LINK
COP 4
CHANGED LINK
COMP WAH TUBE EQ L/R OUTS
L/R OUTS
DIGITAL
CLIP
GATE
SEAMLESS
Section - 6 The J-12 Foot Controller Johnson Millennium
User Guide
76